Stone Fabrication Blog

Quartz behaves differently than natural stone under the blade. Here's what actually matters when you're choosing a CNC bridge saw to cut it all day, every day.

Both are well-established Italian manufacturers with decades of engineering behind them. Here's how to think about the differences that actually matter to a fabrication shop.

Intermac is part of the Biesse Group and serves both glass and stone. Donatoni is stone-fabrication focused from the ground up. Here's what that difference means for your shop.

Park Industries is the best-known US-built bridge saw brand. Donatoni brings 60+ years of Italian stone machinery engineering. Here's how they stack up for a Canadian shop.

You don't need a monumental machine to go CNC. Here's how smaller fabrication shops should think about their first (or next) bridge saw.

Choosing a CNC bridge saw is a five-to-ten-year decision. Here's the practical checklist to work through before you sign anything.

These two machine types often get grouped together, but they solve different problems on the shop floor. Here's how to tell them apart.

"SawJet" describes a CNC bridge saw that combines disc cutting and waterjet cutting on the same machine. Here's what that actually means on the shop floor.

Large-format porcelain and sintered stone slabs are thinner and more brittle than granite or quartz. Here's what actually matters when machining them.

Ultra-compact sintered surfaces like Dekton are engineered to be extremely hard and heat-resistant — which means your cutting setup needs to respect those same properties.

Granite and quartz are the two most common countertop materials in North America, but they don't cut, drill, or polish quite the same way. Here's what changes.

There's no single number — cost depends heavily on machine size, axis count, and whether you're buying new or used. Here's how to think about the real cost of ownership.

A used CNC bridge saw can be a genuinely smart purchase — or a costly mistake — depending entirely on what's behind the listing. Here's how to tell the difference.

More output doesn't have to mean more headcount. Here are the levers that actually move production numbers in a fabrication shop.

"Automation" covers a wide range in a stone shop, from a single CNC-programmed cut to a fully robotic finishing line. Here's what actually exists, and when each level makes sense.

Robotic arms aren't just for large-scale factories anymore. Here's what robotic automation actually does in a countertop shop, and how to know if you're ready for it.