Diamut

Sort By:  
Finger Bit 20x45mm for 2, 3 and 4cm material
$93.00 Usd
$105.00 Usd
Diamut finger bit 22x35mm for 2 and 3 cm thickness
$85.00 Usd
$94.00 Usd
Finger bit designed for Dekton, 20x45mm for 2, 3 and 4 cm material
$95.00 Usd
$105.00 Usd
Diamut Hogger wheel diameter 90mm, 22mm bore
$285.00 Usd
Tool for removing lines on flat polish by using the fluctuating option on the cnc
$454.35 Usd
Diamut T profile for tight corner, with radius of 9mm, especially designed for inside corners of sink cutouts.
$0.00 Usd
Edging cup wheel, for machines like Montresor, Marmomeccanica, Comandulli, etc
$405.00 Usd
Diamut - Profile Z 3cm Flat , diameter 80, 35mm bore
$0.00 Usd
Wheel to calibrate material thickness
$312.50 Usd
Diamut Profile T with Radius 3mm - ideal profile edge for sink cutouts
$0.00 Usd
Drill for faucet holes, thin segment 35mm diameter
$95.00 Usd
Diamut Hogger wheel diameter 120mm, 35mm bore
$343.00 Usd
Diamut profile AK31 for 3cm, diameter 120 x 35mm bore, HyS
$0.00 Usd
Diamut - Profile T 4cm R3, diameter 80mm, 35mm bore
$0.00 Usd
Diamut - Profile A 3cm R15, diameter 120mm, 35mm bore
$0.00 Usd
Diamut - Profile V 3cm, diameter 120mm, 35mm bore
$0.00 Usd
Diamut Profile TP for 4cm, diameter 140 x 35mm bore, HyS
$0.00 Usd
Diamut - Profile T 3cm R3, diameter 80mm, 35mm bore
$0.00 Usd
Finger bit 20x45 - Stone and Granite (DFR01920)
Finger Bit 20x45 HyS DFR01920
For Granite, stone and other materials

7.9 IPM @ 4,000 RPM 5-Segments




Finger Bit 20x45mm for 2, 3 and 4cm material
$93.00 Usd
$105.00 Usd
Finger bit 22x35 - Stone and Granite (DFR02149)

Diamut finger bit 22x35mm for 2 and 3 cm thickness

For Granite, stone and other materials

Diamut finger bit 22x35mm for 2 and 3 cm thickness
$85.00 Usd
$94.00 Usd
Dekton Finger Bit 20x45 (DDKFR10001)
Finger Bit 20x45mm designed for Dekton material

For use with Dekton and other composite glass and porcelain based materials.

7.9 IPM @ 4,000 RPM 5-Segments


Finger bit designed for Dekton, 20x45mm for 2, 3 and 4 cm material
$95.00 Usd
$105.00 Usd
Diamut Hogger wheel 90x22 (DGG75343)

Diamut Hogger wheel 90x22

Diameter 90mm with 22mm bore

Use this tool to remove the majority of stone for Profiles G, GV, FZ, TP and other common shapes.
For 2cm, 3cm or 4cm Stone. Other sizes available by special request.

Diamut Hogger wheel diameter 90mm, 22mm bore
$285.00 Usd
Diamut Line Remover (DGS83974)
Diamut Line Remover

Tool for removing lines on flat polish by using the the fluctuating option on the cnc.
Recommended to use it before the first polish wheel.

Available for thickness up to 4cm.

Diameter 60mm with 35mm bore
Tool for removing lines on flat polish by using the fluctuating option on the cnc
$454.35 Usd
Diamut T 3cm R3 20mm diameter (T 3cm 20mm diameter)
Diamut T 3m 20mm diameter - 1/2 gas connection

Diamut T profile for tight corner, with radius of 9mm, especially designed for inside corners of sink cutouts.\

Set of T 3cm, with R3 - 20mm diameter
4 diamond and 3 polish
Diamut T profile for tight corner, with radius of 9mm, especially designed for inside corners of sink cutouts.
$0.00 Usd
Edging cup wheel (GG77456)
Edging cup wheel, for machines like Montresor, Marmomeccanica, Comandulli

Diamut GG77456
130mm diameter, V60, 24mm thread
Edging cup wheel, for machines like Montresor, Marmomeccanica, Comandulli, etc
$405.00 Usd
Diamut - Profile Z 3cm Flat , 80x35
Diamut - Z 3cm Flat , diameter 80, 35mm bore

Profile set for flat polish.
For better results, you can set Pos 4 to fluctuate
Diamut - Profile Z 3cm Flat , diameter 80, 35mm bore
$0.00 Usd
Calibrating Wheel (DR170605)
Gauging wheel, for reducing thickness on front edge of the material
Diameter 92mm, Segment 10mm on both sides


RPM 4500 to 5000

Feed rate up to 2,000-2,500 for gauging purposing, 1mm stock removal

Feed rate up to 600-1,000 for drain board purposing, 3mm to 10mm stock removal



Wheel to calibrate material thickness
$312.50 Usd
Diamut Profile T - 2cm R3, 80x35

Diamut T profile - 2cm R3, 80x35


Common edge profile and also for sink cut out

Diamut Profile T with Radius 3mm - ideal profile edge for sink cutouts
$0.00 Usd
Core Drill 35mm (DOFGR000035)
Core drill 35mm
Thin wall
For granite, quartz, marble

Drill for faucet holes, thin segment 35mm diameter
$95.00 Usd
Diamut Hogger wheel 120x35 (DGG75232 )

Use this tool to remove the majority of stone for Profiles G, GV, FZ, TP and other common shapes.
For 2cm, 3cm or 4cm Stone. Other sizes available by special request.

Diameter 120mm, core 35mm

Diamut Hogger wheel diameter 120mm, 35mm bore
$343.00 Usd
Diamut profile AK31 for 3cm, diameter 120 x 35mm bore, HyS

Diamut profile AK31 for 3cm, diameter 120 x 35mm bore, HyS


Diamut profile AK31 for 3cm, diameter 120 x 35mm bore, HyS
$0.00 Usd
Diamut - Profile T 4cm R3, 80x35
Diamut - Profile T 4cm R3, diameter 80mm, 35mm bore

Profile T for 4cm material
Diamut - Profile T 4cm R3, diameter 80mm, 35mm bore
$0.00 Usd
Diamut - Profile A 3cm R15, 120x35
Diamut - Profile A 3cm R15, 120x35

Profile A, for 3cm material with Radius 15mm
Diamut - Profile A 3cm R15, diameter 120mm, 35mm bore
$0.00 Usd
Diamut - Profile V 3cm, 120x35
Diamut - Profile V 3cm, diameter 120mm, 35mm bore

Profile V (bullnose), for 3cm material
Diamut - Profile V 3cm, diameter 120mm, 35mm bore
$0.00 Usd
Diamut Profile TP - 4cm, 140x35
Diamut profile TP for 4cm, diameter 140 x 35mm bore, HyS
Pos 1 - Segmented - IN STOCK.

Special Price!

Diamut Profile TP for 4cm, diameter 140 x 35mm bore, HyS
$0.00 Usd
Diamut - Profile T 3cm R3, 80x35
Diamut - Profile T 3cm R3, diameter 80mm, 35mm bore

Most common profile for eased edge with 3mm radius top and bottom.
Diamut - Profile T 3cm R3, diameter 80mm, 35mm bore
$0.00 Usd
Per Page      1 - 18 of 18
  • 1