Elephant srl

Sort By:  
Elephant Jib Crane with column, 4mt column with 5 meter arm with 270 degree rotation and 1000 KGS lifting with motorized hoist. SHIPPING COST TO BE DETERMINED.
$10,450.00 Usd
Vacuum Lifter with 4 suction cups 550x400mm with 0-90 degree manual tilting, powered by air compressor
$4,290.00 Usd
Vacuum Lifter with 2 suction cups 550x400mm with 0-90 degree manual tilting, powered by air compressor
$3,695.00 Usd
Silencer for venturi, vacuum lifter Elephant
$9.95 Usd
Jib Crane with column D1000/5 (D-1000/5)
Elephant Jib Crane with column, from 125 to 1000 kgs capacity, from 3 to 8meter span

Jib Crane with self standing column, rotation 270 degrees,
with span ranging from 3 to 8 meters ( 10st to 26ft)
Lifting capacity with motorized hoist from 125 to 1000 kgs (275lbs to 2,200 lbs)

Available in different other models, please check our Elephant Catalogue

NOTE: this is a large equipment that is made to order, coming from Italy.
          Shipping is calculated extra as it may come inside a 20ft Container.
          Please contact us for more info.
Elephant Jib Crane with column, 4mt column with 5 meter arm with 270 degree rotation and 1000 KGS lifting with motorized hoist. SHIPPING COST TO BE DETERMINED.
$10,450.00 Usd
Vacuum Lifter with 4 suction cups 550x400mm (LM4RC)
Elephant Vacuum Lifter

Vacuum Lifter with 4 suction cups 550x400mm with manual tilting 0-90 degree
  • Structure with 0° to 90° manual tilting able to block in horizontal position;
  • Continuous vacuum pump powered by compressed air;
  • Vacuum gauge with graduated and coloured scale to more easily monitor the degree of vacuum;
  • Powerful and quiet vacuum generators with reduced air consumption of 100 lt/min;
  • Operating pressure 4/6 Bar;
  • Blocking/unblocking rapid device for longitudinally adjusting the pads and 0°-90° adjustment by unthreading the pads;
  • Gaskets made of rubberized fabric and mousse suitable for smooth, flammed and bush-hammered surfaces;
  • High-limit yielding steel suction pads made of first quality materials;
  • No-falling non-return valve for vacuum;
  • Sliding valve to control gripping and releasing of the material with safety block against involuntary manoeuvres;
  • Ample safety tank in aluminium for vacuum reserve, to guarantee gripping even when there is a power cut and with condensation discharge valve;
  • Acoustic and visual alarm system which automatically signals a low vacuum degree. It works autonomously by means of rechargeable batteries and it is supplied with the appropriate battery charger at 220 volt;
Vacuum Lifter with 4 suction cups 550x400mm with 0-90 degree manual tilting, powered by air compressor
$4,290.00 Usd
Vacuum Lifter with 2 suction cups 550x400mm (LM2R)
Elephant LM2R

Vacuum Lifter with 2 suction cups 550x400mm with 0-90 degree manual tilting, powered by air compressor.
  • Structure with 0° to 90° manual tilting able to block in horizontal position;
  • Continuous vacuum pump powered by compressed air;
  • Vacuum gauge with graduated and coloured scale to more easily monitor the degree of vacuum;
  • Powerful and quiet vacuum generators with reduced air consumption of 100 lt/min;
  • Operating pressure 4/6 Bar;
  • Blocking/unblocking rapid device for longitudinally adjusting the pads and 0°-90° adjustment by unthreading the pads;
  • Gaskets made of rubberized fabric and mousse suitable for smooth, flammed and bush-hammered surfaces;
  • High-limit yielding steel suction pads made of first quality materials;
  • No-falling non-return valve for vacuum;
  • Sliding valve to control gripping and releasing of the material with safety block against involuntary manoeuvres;
  • Ample safety tank in aluminium for vacuum reserve, to guarantee gripping even when there is a power cut and with condensation discharge valve;
  • Acoustic and visual alarm system which automatically signals a low vacuum degree. It works autonomously by means of rechargeable batteries and it is supplied with the appropriate battery charger at 220 volt;
Vacuum Lifter with 2 suction cups 550x400mm with 0-90 degree manual tilting, powered by air compressor
$3,695.00 Usd
Silencer for venturi, vacuum lifter Elephant (Silencer)
Silencer for venturi, vacuum lifter Elephant


Silencer for vacuum lifters Elephant, to be fitted on the venturi device

size 43x77 mm
Silencer for venturi, vacuum lifter Elephant
$9.95 Usd
Per Page      1 - 4 of 4
  • 1