Other tools

Sort By:  
Dongsin Core drill bit (BLIND HOLE) 8mmx85mm for cnc and manual sink cutouts machines
$22.00 Usd
Dongsin adapter for Core Bit, blind hole, 10mm shaft
$34.56 Usd
Milling Bit - 20mm diameter - 12mm Reverse Thread for Donatoni CNC saw.
$66.70 Usd
Adaptor for Easy Bit M12 reverse, 1/2 gas reverse thread for Donatoni CNC saw (diamond bit NOT included)
$41.66 Usd
Dongsin Calibrating wheel 85x30mm for milling out stock material
$266.75 Usd
Diamut Hogger wheel diameter 90mm, 22mm bore
$285.00 Usd
Tool for removing lines on flat polish by using the fluctuating option on the cnc
$454.35 Usd
Edging cup wheel, for machines like Montresor, Marmomeccanica, Comandulli, etc
$405.00 Usd
Wheel to calibrate material thickness
$312.50 Usd
Diamut Hogger wheel diameter 120mm, 35mm bore
$343.00 Usd
Dongsin Core drill bit (BLIND HOLE) 8mmx85mm (10125)
Dongsin Core drill bit (BLIND HOLE) 8mmx85mm for cnc and manual sink cutouts machines


Item 10125  

Need adapter 40041
Dongsin Core drill bit (BLIND HOLE) 8mmx85mm for cnc and manual sink cutouts machines
$22.00 Usd
Dongsin adapter for Core Bit, blind hole, 10mm shaft (40041)
Dongsin adapter for Core Bit, blind hole, 10mm shaft


Item 40041

Adapter 1/2 gas REVERSE thread with 10mm shaft
Dongsin adapter for Core Bit, blind hole, 10mm shaft
$34.56 Usd
Milling Bit - 20mm diameter - 12mm Reverse Thread (L261701/M12)
Easy Bit - Milling Bit - 20mm diameter - 12mm Reverse Thread

Milling bit with 12mm reverse thread for Donatoni cnc saw
for sink cut outs, inside square corners and more.

Details: 12mm reverse thread
            20mm diameter
            20mm height
Milling Bit - 20mm diameter - 12mm Reverse Thread for Donatoni CNC saw.
$66.70 Usd
Adaptor for Easy Bit M12 reverse, 1/2 gas reverse thread (40062)
Adaptor for Easy Bit M12 reverse, 1/2 gas reverse thread for Donatoni CNC saw and other machine with Reverse 1/2 Gas thread

Adaptor designed to fit the easy Bit milling tool.

Note: this adapter has REVERSE thread
Adaptor for Easy Bit M12 reverse, 1/2 gas reverse thread for Donatoni CNC saw (diamond bit NOT included)
$41.66 Usd
Dongsin Calibrating wheel 85x30mm (11496)
Dongsin Calibrating wheel 85x30mm for milling out stock material

Item 11496

RPM 3500
Feed 600mm/min  2mm per pass
Dongsin Calibrating wheel 85x30mm for milling out stock material
$266.75 Usd
Diamut Hogger wheel 90x22 (DGG75343)

Diamut Hogger wheel 90x22

Diameter 90mm with 22mm bore

Use this tool to remove the majority of stone for Profiles G, GV, FZ, TP and other common shapes.
For 2cm, 3cm or 4cm Stone. Other sizes available by special request.

Diamut Hogger wheel diameter 90mm, 22mm bore
$285.00 Usd
Diamut Line Remover (DGS83974)
Diamut Line Remover

Tool for removing lines on flat polish by using the the fluctuating option on the cnc.
Recommended to use it before the first polish wheel.

Available for thickness up to 4cm.

Diameter 60mm with 35mm bore
Tool for removing lines on flat polish by using the fluctuating option on the cnc
$454.35 Usd
Edging cup wheel (GG77456)
Edging cup wheel, for machines like Montresor, Marmomeccanica, Comandulli

Diamut GG77456
130mm diameter, V60, 24mm thread
Edging cup wheel, for machines like Montresor, Marmomeccanica, Comandulli, etc
$405.00 Usd
Calibrating Wheel (DR170605)
Gauging wheel, for reducing thickness on front edge of the material
Diameter 92mm, Segment 10mm on both sides


RPM 4500 to 5000

Feed rate up to 2,000-2,500 for gauging purposing, 1mm stock removal

Feed rate up to 600-1,000 for drain board purposing, 3mm to 10mm stock removal



Wheel to calibrate material thickness
$312.50 Usd
Diamut Hogger wheel 120x35 (DGG75232 )

Use this tool to remove the majority of stone for Profiles G, GV, FZ, TP and other common shapes.
For 2cm, 3cm or 4cm Stone. Other sizes available by special request.

Diameter 120mm, core 35mm

Diamut Hogger wheel diameter 120mm, 35mm bore
$343.00 Usd
Per Page      1 - 10 of 10
  • 1