Profile CNC Tools

  • Diamut CNC profile wheels
  • Available from 20mm to 120mm diameter
Thickness: from 2cm to 6cm

HYS - Hyper speed for faster results
KPL - New Line
OPL - Standard speed
Sort By:  
Diamut Hogger wheel diameter 90mm, 22mm bore
$285.00 Usd
Tool for removing lines on flat polish by using the fluctuating option on the cnc
$454.35 Usd
Diamut T profile for tight corner, with radius of 9mm, especially designed for inside corners of sink cutouts.
$0.00 Usd
Diamut - Profile Z 3cm Flat , diameter 80, 35mm bore
$0.00 Usd
Wheel to calibrate material thickness
$312.50 Usd
Diamut Profile T with Radius 3mm - ideal profile edge for sink cutouts
$0.00 Usd
Diamut Hogger wheel diameter 120mm, 35mm bore
$343.00 Usd
Diamut profile AK31 for 3cm, diameter 120 x 35mm bore, HyS
$0.00 Usd
Diamut - Profile T 4cm R3, diameter 80mm, 35mm bore
$0.00 Usd
Diamut - Profile A 3cm R15, diameter 120mm, 35mm bore
$0.00 Usd
Diamut - Profile V 3cm, diameter 120mm, 35mm bore
$0.00 Usd
Diamut Profile TP for 4cm, diameter 140 x 35mm bore, HyS
$0.00 Usd
Diamut - Profile T 3cm R3, diameter 80mm, 35mm bore
$0.00 Usd
Diamut Hogger wheel 90x22 (DGG75343)

Diamut Hogger wheel 90x22

Diameter 90mm with 22mm bore

Use this tool to remove the majority of stone for Profiles G, GV, FZ, TP and other common shapes.
For 2cm, 3cm or 4cm Stone. Other sizes available by special request.

Diamut Hogger wheel diameter 90mm, 22mm bore
$285.00 Usd
Diamut Line Remover (DGS83974)
Diamut Line Remover

Tool for removing lines on flat polish by using the the fluctuating option on the cnc.
Recommended to use it before the first polish wheel.

Available for thickness up to 4cm.

Diameter 60mm with 35mm bore
Tool for removing lines on flat polish by using the fluctuating option on the cnc
$454.35 Usd
Diamut T 3cm R3 20mm diameter (T 3cm 20mm diameter)
Diamut T 3m 20mm diameter - 1/2 gas connection

Diamut T profile for tight corner, with radius of 9mm, especially designed for inside corners of sink cutouts.\

Set of T 3cm, with R3 - 20mm diameter
4 diamond and 3 polish
Diamut T profile for tight corner, with radius of 9mm, especially designed for inside corners of sink cutouts.
$0.00 Usd
Diamut - Profile Z 3cm Flat , 80x35
Diamut - Z 3cm Flat , diameter 80, 35mm bore

Profile set for flat polish.
For better results, you can set Pos 4 to fluctuate
Diamut - Profile Z 3cm Flat , diameter 80, 35mm bore
$0.00 Usd
Calibrating Wheel (DR170605)
Gauging wheel, for reducing thickness on front edge of the material
Diameter 92mm, Segment 10mm on both sides


RPM 4500 to 5000

Feed rate up to 2,000-2,500 for gauging purposing, 1mm stock removal

Feed rate up to 600-1,000 for drain board purposing, 3mm to 10mm stock removal



Wheel to calibrate material thickness
$312.50 Usd
Diamut Profile T - 2cm R3, 80x35

Diamut T profile - 2cm R3, 80x35


Common edge profile and also for sink cut out

Diamut Profile T with Radius 3mm - ideal profile edge for sink cutouts
$0.00 Usd
Diamut Hogger wheel 120x35 (DGG75232 )

Use this tool to remove the majority of stone for Profiles G, GV, FZ, TP and other common shapes.
For 2cm, 3cm or 4cm Stone. Other sizes available by special request.

Diameter 120mm, core 35mm

Diamut Hogger wheel diameter 120mm, 35mm bore
$343.00 Usd
Diamut profile AK31 for 3cm, diameter 120 x 35mm bore, HyS

Diamut profile AK31 for 3cm, diameter 120 x 35mm bore, HyS


Diamut profile AK31 for 3cm, diameter 120 x 35mm bore, HyS
$0.00 Usd
Diamut - Profile T 4cm R3, 80x35
Diamut - Profile T 4cm R3, diameter 80mm, 35mm bore

Profile T for 4cm material
Diamut - Profile T 4cm R3, diameter 80mm, 35mm bore
$0.00 Usd
Diamut - Profile A 3cm R15, 120x35
Diamut - Profile A 3cm R15, 120x35

Profile A, for 3cm material with Radius 15mm
Diamut - Profile A 3cm R15, diameter 120mm, 35mm bore
$0.00 Usd
Diamut - Profile V 3cm, 120x35
Diamut - Profile V 3cm, diameter 120mm, 35mm bore

Profile V (bullnose), for 3cm material
Diamut - Profile V 3cm, diameter 120mm, 35mm bore
$0.00 Usd
Diamut Profile TP - 4cm, 140x35
Diamut profile TP for 4cm, diameter 140 x 35mm bore, HyS
Pos 1 - Segmented - IN STOCK.

Special Price!

Diamut Profile TP for 4cm, diameter 140 x 35mm bore, HyS
$0.00 Usd
Diamut - Profile T 3cm R3, 80x35
Diamut - Profile T 3cm R3, diameter 80mm, 35mm bore

Most common profile for eased edge with 3mm radius top and bottom.
Diamut - Profile T 3cm R3, diameter 80mm, 35mm bore
$0.00 Usd
Per Page      1 - 13 of 13
  • 1