Other tools
Dongsin Core drill bit (BLIND HOLE) 8mmx85mm for cnc and manual sink cutouts machines
Adaptor for Easy Bit M12 reverse, 1/2 gas reverse thread for Donatoni CNC saw (diamond bit NOT included)
Diamut DR170605 Calibrating Wheel (DR170605)
Gauging wheel, for reducing thickness on front edge of the material
Diameter 92mm, Segment 10mm on both sides
Diameter 92mm, Segment 10mm on both sides
RPM 4500 to 5000
Feed rate up to 2,000-2,500 for gauging purposing, 1mm stock removal
Feed rate up to 600-1,000 for drain board purposing, 3mm to 10mm stock removal
Wheel to calibrate material thickness
Diamut DGG75232 Hogger wheel 120x35 (DGG75232 )
Use this tool to remove the majority of stone for Profiles G, GV, FZ, TP and other common shapes.
For 2cm, 3cm or 4cm Stone. Other sizes available by special request.
Diameter 120mm, core 35mm
Diamut Hogger wheel diameter 120mm, 35mm bore
Edging GG77456 cup wheel (GG77456)
Edging cup wheel, for machines like Montresor, Marmomeccanica, Comandulli
Diamut GG77456
130mm diameter, V60, 24mm thread
Diamut GG77456
130mm diameter, V60, 24mm thread
Edging cup wheel, for machines like Montresor, Marmomeccanica, Comandulli, etc
Diamut DGS83974 Line Remover (DGS83974)
Diamut Line Remover
Tool for removing lines on flat polish by using the the fluctuating option on the cnc.
Recommended to use it before the first polish wheel.
Available for thickness up to 4cm.
Diameter 60mm with 35mm bore
Tool for removing lines on flat polish by using the the fluctuating option on the cnc.
Recommended to use it before the first polish wheel.
Available for thickness up to 4cm.
Diameter 60mm with 35mm bore
Tool for removing lines on flat polish by using the fluctuating option on the cnc
Diamut DGG75343 Hogger wheel 90x22 (DGG75343)
Diamut Hogger wheel 90x22
Diameter 90mm with 22mm bore
Use this tool to remove the majority of stone for Profiles G, GV, FZ, TP and other common shapes.
For 2cm, 3cm or 4cm Stone. Other sizes available by special request.
Diamut Hogger wheel diameter 90mm, 22mm bore
Dongsin Core drill bit (BLIND HOLE) 8mmx85mm (10125)
Dongsin Core drill bit (BLIND HOLE) 8mmx85mm for cnc and manual sink cutouts machines
Item 10125
Need adapter 40041
Item 10125
Need adapter 40041
Dongsin Core drill bit (BLIND HOLE) 8mmx85mm for cnc and manual sink cutouts machines
Dongsin adapter for Core Bit, blind hole, 10mm shaft (40041)
Dongsin adapter for Core Bit, blind hole, 10mm shaft
Item 40041
Adapter 1/2 gas REVERSE thread with 10mm shaft
Item 40041
Adapter 1/2 gas REVERSE thread with 10mm shaft
Dongsin adapter for Core Bit, blind hole, 10mm shaft
Milling Bit - 20mm diameter - 12mm Reverse Thread (L261701/M12)
Easy Bit - Milling Bit - 20mm diameter - 12mm Reverse Thread
Milling bit with 12mm reverse thread for Donatoni cnc saw
for sink cut outs, inside square corners and more.
Details: 12mm reverse thread
20mm diameter
20mm height
Milling bit with 12mm reverse thread for Donatoni cnc saw
for sink cut outs, inside square corners and more.
Details: 12mm reverse thread
20mm diameter
20mm height
Milling Bit - 20mm diameter - 12mm Reverse Thread for Donatoni CNC saw.
Adaptor for Easy Bit M12 reverse, 1/2 gas reverse thread (40062)
Adaptor for Easy Bit M12 reverse, 1/2 gas reverse thread for Donatoni CNC saw and other machine with Reverse 1/2 Gas thread
Adaptor designed to fit the easy Bit milling tool.
Note: this adapter has REVERSE thread
Adaptor designed to fit the easy Bit milling tool.
Note: this adapter has REVERSE thread
Adaptor for Easy Bit M12 reverse, 1/2 gas reverse thread for Donatoni CNC saw (diamond bit NOT included)
Dongsin Calibrating wheel 85x30mm (11496)
Dongsin Calibrating wheel 85x30mm for milling out stock material
Item 11496
RPM 3500
Feed 600mm/min 2mm per pass
Item 11496
RPM 3500
Feed 600mm/min 2mm per pass
Dongsin Calibrating wheel 85x30mm for milling out stock material
- 1