Diamut CNC tools
Diamut CNC tools
Finger Bits - Core Drills - Hogging Wheels - Calibrating Wheels - Profiles Wheels and other tools
Finger Bits - Core Drills - Hogging Wheels - Calibrating Wheels - Profiles Wheels and other tools
Diamut - Profile V 3cm, diameter 120mm, 35mm bore
SPECIAL PRICE FOR 4 METAL + 2 POLISH WHEELS
Diamut T profile for tight corner, with radius of 9mm, especially designed for inside corners of sink cutouts.
Diamut DFR01920 Finger bit 20x45 - Stone and Granite (DFR01920)
Finger Bit 20x45 HyS DFR01920
For Granite, stone and other materials
For Granite, stone and other materials
7.9 IPM @ 4,000 RPM 5-Segments
Finger Bit 20x45mm for 2, 3 and 4cm material
Diamut DR170605 Calibrating Wheel (DR170605)
Gauging wheel, for reducing thickness on front edge of the material
Diameter 92mm, Segment 10mm on both sides
Diameter 92mm, Segment 10mm on both sides
RPM 4500 to 5000
Feed rate up to 2,000-2,500 for gauging purposing, 1mm stock removal
Feed rate up to 600-1,000 for drain board purposing, 3mm to 10mm stock removal
Wheel to calibrate material thickness
Diamut DOFGR000035 Core Drill 35mm (DOFGR000035)
Core drill 35mm
Thin wall
For granite, quartz, marble
Thin wall
For granite, quartz, marble
Drill for faucet holes, thin segment 35mm diameter
Diamut DFR02149 Finger bit 22x35 - Stone and Granite (DFR02149)
Diamut finger bit 22x35mm for 2 and 3 cm thickness
For Granite, stone and other materials
Diamut finger bit 22x35mm for 2 and 3 cm thickness
Dongsin Finger Bit 20x45mm Twin Twister (13507)
Dongsin Finger Bit 20x45mm Twin Twister for stone, quartz and other materials
Item 13507: 20mm diameter, 45mm height
RPM 5000-5500
F/R 350mm/min
Note: always reduce the feeding rate at half when the bit is new for the first 2 or 3 meters
Item 13507: 20mm diameter, 45mm height
RPM 5000-5500
F/R 350mm/min
Note: always reduce the feeding rate at half when the bit is new for the first 2 or 3 meters
Dongsin Finger Bit 20x45mm Twin Twister for stone, quartz and other materials
Diamut DGG75232 Hogger wheel 120x35 (DGG75232 )
Use this tool to remove the majority of stone for Profiles G, GV, FZ, TP and other common shapes.
For 2cm, 3cm or 4cm Stone. Other sizes available by special request.
Diameter 120mm, core 35mm
Diamut Hogger wheel diameter 120mm, 35mm bore
Edging GG77456 cup wheel (GG77456)
Edging cup wheel, for machines like Montresor, Marmomeccanica, Comandulli
Diamut GG77456
130mm diameter, V60, 24mm thread
Diamut GG77456
130mm diameter, V60, 24mm thread
Edging cup wheel, for machines like Montresor, Marmomeccanica, Comandulli, etc
Diamut DGG75343 Hogger wheel 90x22 (DGG75343)
Diamut Hogger wheel 90x22
Diameter 90mm with 22mm bore
Use this tool to remove the majority of stone for Profiles G, GV, FZ, TP and other common shapes.
For 2cm, 3cm or 4cm Stone. Other sizes available by special request.
Diamut Hogger wheel diameter 90mm, 22mm bore
Diamut - Profile V 3cm, 120x35 -
Diamut - Profile V 3cm, diameter 120mm, 35mm bore
Profile V (bullnose), for 3cm material
Profile V (bullnose), for 3cm material
Diamut - Profile V 3cm, diameter 120mm, 35mm bore
SPECIAL PRICE FOR 4 METAL + 2 POLISH WHEELS
Diamut - Profile T 3cm R3, 80x35
Diamut - Profile T 3cm R3, diameter 80mm, 35mm bore
Most common profile for eased edge with 3mm radius top and bottom.
Most common profile for eased edge with 3mm radius top and bottom.
Diamut - Profile T 3cm R3, diameter 80mm, 35mm bore
Milling Bit - 20mm diameter - 12mm Reverse Thread (L261701/M12)
Easy Bit - Milling Bit - 20mm diameter - 12mm Reverse Thread
Milling bit with 12mm reverse thread for Donatoni cnc saw
for sink cut outs, inside square corners and more.
Details: 12mm reverse thread
20mm diameter
20mm height
Milling bit with 12mm reverse thread for Donatoni cnc saw
for sink cut outs, inside square corners and more.
Details: 12mm reverse thread
20mm diameter
20mm height
Milling Bit - 20mm diameter - 12mm Reverse Thread for Donatoni CNC saw.
Diamut T 3cm R3 20mm diameter (T 3cm 20mm diameter)
Diamut T 3m 20mm diameter - 1/2 gas connection
Diamut T profile for tight corner, with radius of 9mm, especially designed for inside corners of sink cutouts.\
Set of T 3cm, with R3 - 20mm diameter
4 diamond and 3 polish
Diamut T profile for tight corner, with radius of 9mm, especially designed for inside corners of sink cutouts.\
Set of T 3cm, with R3 - 20mm diameter
4 diamond and 3 polish
Diamut T profile for tight corner, with radius of 9mm, especially designed for inside corners of sink cutouts.
Diamut - Profile Z 3cm Flat , 80x35
Diamut - Z 3cm Flat , diameter 80, 35mm bore
Profile set for flat polish.
For better results, you can set Pos 4 to fluctuate
Profile set for flat polish.
For better results, you can set Pos 4 to fluctuate
Diamut - Profile Z 3cm Flat , diameter 80, 35mm bore
Diamut Profile T - 2cm R3, 80x35
Diamut T profile - 2cm R3, 80x35
Common edge profile and also for sink cut out
Diamut Profile T with Radius 3mm - ideal profile edge for sink cutouts
Diamut profile AK31 for 3cm, diameter 120 x 35mm bore, HyS
Diamut profile AK31 for 3cm, diameter 120 x 35mm bore, HyS
Diamut profile AK31 for 3cm, diameter 120 x 35mm bore, HyS
Diamut - Profile T 4cm R3, 80x35
Diamut - Profile T 4cm R3, diameter 80mm, 35mm bore
Profile T for 4cm material
Profile T for 4cm material
Diamut - Profile T 4cm R3, diameter 80mm, 35mm bore
Diamut - Profile A 3cm R15, 120x35
Diamut - Profile A 3cm R15, 120x35
Profile A, for 3cm material with Radius 15mm
Profile A, for 3cm material with Radius 15mm
Diamut - Profile A 3cm R15, diameter 120mm, 35mm bore
Diamut Profile TP - 4cm, 140x35
Diamut profile TP for 4cm, diameter 140 x 35mm bore, HyS
Pos 1 - Segmented - IN STOCK.
Special Price!
Pos 1 - Segmented - IN STOCK.
Special Price!
Diamut Profile TP for 4cm, diameter 140 x 35mm bore, HyS
- 1