Lifting Solutions

Elephant Jib Crane with column, from 125 to 1000 kgs capacity, from 3 to 8meter span

Jib Crane with self standing column, rotation 270 degrees,
with span ranging from 3 to 8 meters ( 10st to 26ft)
Lifting capacity with motorized hoist from 125 to 1000 kgs (275lbs to 2,200 lbs)

Available in different other models, please check our Elephant Catalogue

NOTE: this is a large equipment that is made to order, coming from Italy.
          Shipping is calculated extra as it may come inside a 20ft Container.
          Please contact us for more info.

Elephant Vacuum Lifter

Vacuum Lifter with 4 suction cups 550x400mm with manual tilting 0-90 degree

• Structure with 0° to 90° manual tilting able to block in horizontal position;
• Continuous vacuum pump powered by compressed air;
• Vacuum gauge with graduated and coloured scale to more easily monitor the degree of vacuum;
• Powerful and quiet vacuum generators with reduced air consumption of 100 lt/min;
• Operating pressure 4/6 Bar;
• Blocking/unblocking rapid device for longitudinally adjusting the pads and 0°-90° adjustment by unthreading the pads;
• Gaskets made of rubberized fabric and mousse suitable for smooth, flammed and bush-hammered surfaces;
• High-limit yielding steel suction pads made of first quality materials;
• No-falling non-return valve for vacuum;
• Sliding valve to control gripping and releasing of the material with safety block against involuntary manoeuvres;
• Ample safety tank in aluminium for vacuum reserve, to guarantee gripping even when there is a power cut and with condensation discharge valve;
• Acoustic and visual alarm system which automatically signals a low vacuum degree. It works autonomously by means of rechargeable batteries and it is supplied with the appropriate battery charger at 220 volt;

Elephant LM2R

Vacuum Lifter with 2 suction cups 550x400mm with 0-90 degree manual tilting, powered by air compressor.

• Structure with 0° to 90° manual tilting able to block in horizontal position;
• Continuous vacuum pump powered by compressed air;
• Vacuum gauge with graduated and coloured scale to more easily monitor the degree of vacuum;
• Powerful and quiet vacuum generators with reduced air consumption of 100 lt/min;
• Operating pressure 4/6 Bar;
• Blocking/unblocking rapid device for longitudinally adjusting the pads and 0°-90° adjustment by unthreading the pads;
• Gaskets made of rubberized fabric and mousse suitable for smooth, flammed and bush-hammered surfaces;
• High-limit yielding steel suction pads made of first quality materials;
• No-falling non-return valve for vacuum;
• Sliding valve to control gripping and releasing of the material with safety block against involuntary manoeuvres;
• Ample safety tank in aluminium for vacuum reserve, to guarantee gripping even when there is a power cut and with condensation discharge valve;
• Acoustic and visual alarm system which automatically signals a low vacuum degree. It works autonomously by means of rechargeable batteries and it is supplied with the appropriate battery charger at 220 volt;