Diamut
Diamut - Profile V 3cm, diameter 120mm, 35mm bore
SPECIAL PRICE FOR 4 METAL + 2 POLISH WHEELS
Diamut T profile for tight corner, with radius of 9mm, especially designed for inside corners of sink cutouts.
Diamut DFR01920 Finger bit 20x45 - Stone and Granite (DFR01920)
Finger Bit 20x45 HyS DFR01920
For Granite, stone and other materials
For Granite, stone and other materials
7.9 IPM @ 4,000 RPM 5-Segments
Finger Bit 20x45mm for 2, 3 and 4cm material
Diamut DR170605 Calibrating Wheel (DR170605)
Gauging wheel, for reducing thickness on front edge of the material
Diameter 92mm, Segment 10mm on both sides
Diameter 92mm, Segment 10mm on both sides
RPM 4500 to 5000
Feed rate up to 2,000-2,500 for gauging purposing, 1mm stock removal
Feed rate up to 600-1,000 for drain board purposing, 3mm to 10mm stock removal
Wheel to calibrate material thickness
Diamut DOFGR000035 Core Drill 35mm (DOFGR000035)
Core drill 35mm
Thin wall
For granite, quartz, marble
Thin wall
For granite, quartz, marble
Drill for faucet holes, thin segment 35mm diameter
Diamut DFR02149 Finger bit 22x35 - Stone and Granite (DFR02149)
Diamut finger bit 22x35mm for 2 and 3 cm thickness
For Granite, stone and other materials
Diamut finger bit 22x35mm for 2 and 3 cm thickness
Diamut DGG75232 Hogger wheel 120x35 (DGG75232 )
Use this tool to remove the majority of stone for Profiles G, GV, FZ, TP and other common shapes.
For 2cm, 3cm or 4cm Stone. Other sizes available by special request.
Diameter 120mm, core 35mm
Diamut Hogger wheel diameter 120mm, 35mm bore
Edging GG77456 cup wheel (GG77456)
Edging cup wheel, for machines like Montresor, Marmomeccanica, Comandulli
Diamut GG77456
130mm diameter, V60, 24mm thread
Diamut GG77456
130mm diameter, V60, 24mm thread
Edging cup wheel, for machines like Montresor, Marmomeccanica, Comandulli, etc
Diamut DGS83974 Line Remover (DGS83974)
Diamut Line Remover
Tool for removing lines on flat polish by using the the fluctuating option on the cnc.
Recommended to use it before the first polish wheel.
Available for thickness up to 4cm.
Diameter 60mm with 35mm bore
Tool for removing lines on flat polish by using the the fluctuating option on the cnc.
Recommended to use it before the first polish wheel.
Available for thickness up to 4cm.
Diameter 60mm with 35mm bore
Tool for removing lines on flat polish by using the fluctuating option on the cnc
Diamut DGG75343 Hogger wheel 90x22 (DGG75343)
Diamut Hogger wheel 90x22
Diameter 90mm with 22mm bore
Use this tool to remove the majority of stone for Profiles G, GV, FZ, TP and other common shapes.
For 2cm, 3cm or 4cm Stone. Other sizes available by special request.
Diamut Hogger wheel diameter 90mm, 22mm bore
Diamut - Profile V 3cm, 120x35 -
Diamut - Profile V 3cm, diameter 120mm, 35mm bore
Profile V (bullnose), for 3cm material
Profile V (bullnose), for 3cm material
Diamut - Profile V 3cm, diameter 120mm, 35mm bore
SPECIAL PRICE FOR 4 METAL + 2 POLISH WHEELS
Diamut - Profile T 3cm R3, 80x35
Diamut - Profile T 3cm R3, diameter 80mm, 35mm bore
Most common profile for eased edge with 3mm radius top and bottom.
Most common profile for eased edge with 3mm radius top and bottom.
Diamut - Profile T 3cm R3, diameter 80mm, 35mm bore
Diamut T 3cm R3 20mm diameter (T 3cm 20mm diameter)
Diamut T 3m 20mm diameter - 1/2 gas connection
Diamut T profile for tight corner, with radius of 9mm, especially designed for inside corners of sink cutouts.\
Set of T 3cm, with R3 - 20mm diameter
4 diamond and 3 polish
Diamut T profile for tight corner, with radius of 9mm, especially designed for inside corners of sink cutouts.\
Set of T 3cm, with R3 - 20mm diameter
4 diamond and 3 polish
Diamut T profile for tight corner, with radius of 9mm, especially designed for inside corners of sink cutouts.
Diamut - Profile Z 3cm Flat , 80x35
Diamut - Z 3cm Flat , diameter 80, 35mm bore
Profile set for flat polish.
For better results, you can set Pos 4 to fluctuate
Profile set for flat polish.
For better results, you can set Pos 4 to fluctuate
Diamut - Profile Z 3cm Flat , diameter 80, 35mm bore
Diamut Profile T - 2cm R3, 80x35
Diamut T profile - 2cm R3, 80x35
Common edge profile and also for sink cut out
Diamut Profile T with Radius 3mm - ideal profile edge for sink cutouts
Diamut profile AK31 for 3cm, diameter 120 x 35mm bore, HyS
Diamut profile AK31 for 3cm, diameter 120 x 35mm bore, HyS
Diamut profile AK31 for 3cm, diameter 120 x 35mm bore, HyS
Diamut - Profile T 4cm R3, 80x35
Diamut - Profile T 4cm R3, diameter 80mm, 35mm bore
Profile T for 4cm material
Profile T for 4cm material
Diamut - Profile T 4cm R3, diameter 80mm, 35mm bore
Diamut - Profile A 3cm R15, 120x35
Diamut - Profile A 3cm R15, 120x35
Profile A, for 3cm material with Radius 15mm
Profile A, for 3cm material with Radius 15mm
Diamut - Profile A 3cm R15, diameter 120mm, 35mm bore
Diamut Profile TP - 4cm, 140x35
Diamut profile TP for 4cm, diameter 140 x 35mm bore, HyS
Pos 1 - Segmented - IN STOCK.
Special Price!
Pos 1 - Segmented - IN STOCK.
Special Price!
Diamut Profile TP for 4cm, diameter 140 x 35mm bore, HyS
- 1